MadgeTech
AVS140-6 – Autoclave Validation Data Logging System
MadgeTech AVS140-6 autoclave validation set: 5 HiTemp140 loggers, PR140 pressure logger, IFC406 multiplexer and Secure software. ISO 17025 certificates.
View product
MadgeTech Data Loggers
DHS – Dry Heat Sterilization Data Logging System
MadgeTech DHS kit for validating dry heat sterilization cycles: HiTemp140-M12 logger, ThermoVault Max thermal barrier and 36 in. RTD probe with M12 connector.
Key features
- Validates dry heat sterilisation cycles, measuring up to +400 °C
- ThermoVault Max barrier protects the logger electronics
- 36-inch RTD probe (glass-braided or stainless overbraid) with M12 connector
- HiTemp140-M12 logger, supplied with a standard calibration certificate
Genuine MadgeTech product, supplied by an authorised distributor.
Overview
Dry heat ovens run far hotter than any logger body can survive, so validating them needs a different approach. In the DHS system, a HiTemp140-M12 logger sits inside the ThermoVault Max thermal barrier while a 36-inch RTD probe runs out into the chamber or load. The barrier protects the electronics and the probe does the measuring, across a range of -200 °C to +400 °C.
The DHS is intended for dry applications only; it is not rated for steam or water. A standard calibration certificate is included.
Typical uses
- Dry heat sterilisation oven validation
- Hot-air ovens in pharmaceutical and laboratory settings
- High-temperature process studies beyond the range of standard loggers
Learn more in our guide to sterilizer temperature monitoring, or ask about our autoclave and steriliser validation service.
Specifications
- Temperature range
- -200 °C to +400 °C
- Accuracy
- ±1.2 °C (-200 °C to +400 °C)
- Logger
- HiTemp140-M12 inside a ThermoVault Max thermal barrier
- Probe
- 36 in. glass braided RTD (or stainless steel overbraid), M12 connector
- Memory
- 21,504 readings
- Use
- Dry applications only (not IP rated)
- Calibration
- Standard calibration certificate
Specifications are provided by the manufacturer and may change. Please confirm with us before ordering.
Related products
MadgeTech
HiTemp140 – High Temperature Data Logger
Buy the MadgeTech HiTemp140 high temperature data logger in India: submersible, -40 °C to +140 °C, several probe lengths, ISO 17025 accredited calibration.
View product
RTD Probes
RTD Probes
Standard and custom RTD temperature probes for data loggers and process instruments: choose sensor, wiring, length, sheath and connector. Supplied in India.
View product
MadgeTech
HiTemp140-CF – Heat Penetration Data Logger
MadgeTech HiTemp140-CF heat penetration data logger for canning, retort and pasteurisation studies. Submersible, -40 to +140 °C, fits ThermaLock and CF202.
View productNeed help choosing the right instrument?
Share your application and our team will recommend a solution and send a quote.